We use the state-of-art Thermal Imaging technology to proactively manage your safety
For those years in between Fixed Wire testing, how can you proactively keep on top of the status of your electrical systems?

If you want a way to gather useful information on the performance of your electrics between inspections, then Thermal Imaging may well be the perfect solution.

Thermal Imaging uses thermal cameras to identify problem areas with electrical equipment. Potential problems can often be found due to excess heat being released by an electrical system.

By using Thermal Imaging, we can accurately identify existing faults with your electrical installations. It also helps us to predict any potential issues that may go undetected during routine inspections.

The result for you? A greater peace of mind and the reassurance that you’re being proactive with your compliance.


Our engineers can accurately identify existing faults with an electrical installation, as well as predict potential future issues that could save lives.

By detecting anomalies often invisible to the naked eye, thermography allows corrective action to be taken before costly system failures occur. Thermal Imaging or Thermography is the process of using a special camera designed to look only for heat by way of infra red (IR) energy waves. Potential problems can often be found due to excess heat being released by an electrical system, even those which would normally produce some heat when performing at their optimum level.

If undetected these problems can lead to failure and can result in expensive production loss or downtime and, in the most extreme case, can lead to fire. A regular programme of thermal imaging as part of routine maintenance can highlight potential problems long before any event. As a result any required repairs can be planned for in terms of both time and budget. In short, it is an invaluable resource for predictive maintenance. Thermography has applications in many different areas which are listed below.

Thermography can detect the following in electrical systems:

  • Loose connections
  • Overloads
  • Phase imbalances
  • Corrosion
  • High resistance in fuses and switchgear
  • Thermography can detect the following in mechanical systems:
  • Motor overload
  • Worn Bearings
  • Boiler seal leakage
  • Insulation breakdown
  • Hydraulic, steam and hot water systems
  • Tank levels and insulation
  • Valves
  • Turbines
  • Thermography can detect the following in buildings:
  • Continuity of insulation
  • Flat roof leakage
  • Heating, ventilation and air conditioning
If you would like to see what ETM can do for your Thermal Imaging, contact us directly to talk through your requirements.


ETM are accredited specialists in the following areas, providing cost effective compliance services
Portable Appliance Testing (PAT) • Electrical Installation • Electrical Inspection • Fixed Wire Testing• Repairs and Remedial
Electrical Compliance • Energy Monitoring • Thermal Imaging • Emergency Lighting Testing • Fire Alarm Testing • Fire Extinguisher • Lightning Protection •Legionnaires Testing

Would you like to work with the experts on your Electrical Repairs & Remedial Works? Contact one of the friendly ETM team to find out the next steps. 01922 710 014 | admin@electricaltestmidlands.com

Fixed Wire Testing, electrical testing, installations, repairs & remedial works. Proactive, experienced and accessible. Removing frustrations while assisting customers to plan, manage, install and maintain safe and compliant businesses. A family business culture and service, from expert, accredited professionals.